How to Prepare a Manuscript for SCI Journal Submission

How to Write a Dissertation ConclusionHow to Write a Dissertation Conclusion

A well-conducted study can still fail at the first hurdle if the manuscript itself isn’t prepared to the standard SCI journal editors expect. This isn’t about padding a paper with jargon — it’s about structure, precision, and completeness, all of which are learnable and checkable before you ever click submit. This guide walks through manuscript preparation section by section, plus the formatting, figure, and documentation requirements that trip up even strong research, and closes with a full pre-submission checklist you can reuse for every paper you write.

Table of Contents

  1. Start With the Target Journal’s Author Guidelines
  2. Title and Abstract: Your Most-Read (and Most-Skipped) Sections
  3. Keywords and Discoverability
  4. Introduction: Building the Case for Your Study
  5. Methods: Writing for Replicability
  6. Results: Letting the Data Speak
  7. Discussion: Interpretation Without Overreach
  8. Conclusion and Limitations
  9. References and Citation Management
  10. Figures, Tables, and Supplementary Material
  11. The Cover Letter
  12. Formatting Details That Cause Desk Rejections
  13. Writing Style and Language Polish
  14. Preparing for Plagiarism Screening
  15. Version Control and Managing Co-Author Input
  16. A Pre-Submission Checklist
  17. A Worked Example: Turning a Thesis Chapter Into a Submittable Manuscript
  18. Preparing the Same Manuscript for a Backup Journal
  19. Common Manuscript Preparation Mistakes That Recur Across Disciplines
  20. How Writers.ng Supports Manuscript Preparation
  21. Frequently Asked Questions

1. Start With the Target Journal’s Author Guidelines

Before writing or reformatting a single section, open the specific journal’s “Author Guidelines” or “Instructions for Authors” page and read it in full — not skimmed. Note the required manuscript structure, word or page limits, reference style (APA, Vancouver, IEEE, and others all have subtly different conventions), figure resolution requirements, and any journal-specific sections (highlights, graphical abstract, data availability statement). Reformatting a manuscript originally prepared for a different journal is one of the most common sources of overlooked errors — headings, citation style, and section order all need a fresh check, not just a find-and-replace of the journal name. If you haven’t yet confirmed the journal is genuinely SCI-indexed, do that first — our guide on how to check if a journal is SCI indexed shows the exact verification steps, since formatting a manuscript to a journal’s spec is wasted effort if the journal itself doesn’t meet your institution’s requirements.

2. Title and Abstract: Your Most-Read (and Most-Skipped) Sections

The title should be specific and searchable — include your key variables and, where relevant, your study context (population, setting, or region) rather than a vague thematic phrase. Compare “Farmer perceptions of climate adaptation in Nigeria” (vague) against “Smallholder farmer adaptation strategies to erratic rainfall in Kebbi State, Nigeria: a mixed-methods study” (specific and searchable).

The abstract, typically 200–300 words, should function as a standalone summary: background/gap, objective, method, key results (with actual figures, not just “results are discussed”), and conclusion. Reviewers and editors often decide whether to engage seriously with a manuscript based on the abstract alone, so avoid the temptation to write it hastily as an afterthought. Some journals now require a structured abstract with explicit subheadings (Background, Methods, Results, Conclusion); check the guidelines before assuming a free-form abstract is acceptable.

3. Keywords and Discoverability

Choose 4–6 keywords that reflect how someone would actually search for your study — combining broader disciplinary terms with more specific methodological or contextual terms. Searching your own draft keyword set on Google Scholar before finalizing them is a useful sense-check: if your chosen keywords surface papers wildly different from your own topic, they’re likely too broad or ambiguous to aid discoverability. Avoid simply repeating words already in your title, since some indexing systems weight title and keyword overlap poorly for discoverability purposes — use keywords to add distinct search angles instead.

4. Introduction: Building the Case for Your Study

Structure the introduction as a funnel: broad context, narrowing through existing literature, to a precisely stated gap, ending with your study’s specific objective (and hypothesis, where applicable). Avoid a common weakness in manuscripts from under-resourced research settings: citing only a handful of sources because access to a broader literature base is limited. Where full-text access is constrained, Google Scholar and open-access repositories like DOAJ and AJOL can meaningfully widen your reference base without requiring a paid subscription.

Aim for a literature review that is critical rather than descriptive — instead of simply listing what prior studies found, group them by theme or finding and explicitly note where they agree, disagree, or leave a gap your study addresses. This is one of the clearest signals reviewers use to judge whether an author genuinely understands the field or has merely compiled citations.

5. Methods: Writing for Replicability

Write the methods section as if instructing another competent researcher to repeat your study exactly. Include:

  • Study design (with a name if it’s a recognized design type)
  • Setting and population, with clear inclusion/exclusion criteria
  • Sample size and, where applicable, the calculation or justification behind it
  • Instruments used, including validation details or citations to the instrument’s original validation study
  • Data collection procedure, in enough detail to reveal exactly what participants or data sources experienced
  • Statistical methods, named specifically (not just “data was analyzed statistically”) including the specific software and version used
  • Ethical approval details, including the approving body’s name and reference number, consistent with standards set by the Committee on Publication Ethics (COPE)

Where an instrument was originally administered in a Nigerian language and translated, briefly describe the translation and back-translation process, since reviewers increasingly expect this to be documented rather than assumed.

6. Results: Letting the Data Speak

Present findings in a logical order, typically following the sequence of your research questions or hypotheses, using tables and figures to carry dense numerical detail rather than restating every number in prose. Report exact statistics (test statistic, degrees of freedom, p-value, effect size where applicable) rather than only stating significance. Avoid interpreting findings here — save that for the discussion, since mixing interpretation into results is a common reviewer complaint. A useful discipline: read back through your results section and flag any sentence that starts with “this suggests” or “this shows that” — those belong in the discussion, not here.

7. Discussion: Interpretation Without Overreach

Open by directly addressing whether your findings support or contradict your stated hypothesis or objective. Connect findings to the specific literature gap named in your introduction — this is where many manuscripts either repeat the introduction verbatim (weak) or genuinely engage with how the new findings shift the existing understanding (strong). Address unexpected findings honestly rather than omitting them, and compare your results to prior studies specifically, not just in general terms — naming the study and stating precisely how your finding aligns or diverges from it.

8. Conclusion and Limitations

State your study’s contribution clearly and concisely, avoiding restatement of the entire discussion. List limitations honestly — sample size, single-institution or single-region setting, potential confounders, or methodological constraints — since reviewers read a limitations section that’s suspiciously thin as evidence the author hasn’t critically examined their own work. Where relevant, suggest specific directions for future research rather than a generic “further research is needed” — name the specific gap your own study couldn’t close and what design would close it.

9. References and Citation Management

Use reference management software (Zotero, EndNote, or Mendeley) rather than manually formatting citations — most SCI journals now accept direct export files in their required style, and manual reference lists are disproportionately prone to formatting errors that slow down the editorial process. Cross-check that every in-text citation has a corresponding reference list entry and vice versa; mismatches are a common, entirely avoidable source of query letters from copyeditors after acceptance. Keep your reference list current — a manuscript that’s been through several revision rounds over many months can easily accumulate an outdated literature review if you don’t periodically re-check for newly published, directly relevant work.

10. Figures, Tables, and Supplementary Material

Check the journal’s specific resolution requirements for figures (commonly 300 dpi minimum for print-quality reproduction) and its preferred file formats (TIFF, EPS, or high-resolution PNG/JPEG, depending on the journal). Each table and figure should be interpretable on its own, with a clear title and, where necessary, a footnote explaining abbreviations — reviewers frequently judge a manuscript’s overall care level by how well figures and tables stand alone. Supplementary material (extended data tables, additional analyses) should be prepared as a separate file per the journal’s specific supplementary material guidelines. If you’re reproducing or adapting a figure from another published source, secure written permission from the copyright holder before submission — a citation alone is not sufficient permission to reproduce copyrighted figures.

11. The Cover Letter

A strong cover letter briefly states the study’s core question, its key finding, and why it fits the specific journal (referencing the journal’s scope or a recent related publication it has run) — not a generic template reused across every submission. Confirm the manuscript is original, not under review elsewhere, and disclose any related preprints. Keep it to one page. A cover letter that simply restates the abstract in different words is a wasted opportunity — use it instead to make the case for fit and significance directly to the handling editor.

12. Formatting Details That Cause Desk Rejections

  • Wrong reference style for the target journal
  • Missing line numbering (many journals require continuous line numbers for reviewer reference)
  • Exceeding the stated word or page limit without a waiver request
  • Figures embedded at low resolution rather than submitted as separate high-resolution files
  • Missing title page elements (full author list, affiliations, corresponding author contact, ORCID IDs)
  • Font, margin, or spacing that doesn’t match the journal’s template, particularly for journals using LaTeX templates in engineering and physical sciences
  • Inconsistent use of abbreviations, introduced once but then used inconsistently or not at all thereafter

13. Writing Style and Language Polish

Even technically sound manuscripts are frequently returned or rejected over language issues that have nothing to do with the underlying science. Common patterns worth checking for specifically: inconsistent tense between literature review (generally present tense for established findings) and methods/results (generally past tense); overly long, multi-clause sentences that bury the main finding; and mixed British/American spelling within the same document. Reading the manuscript aloud, section by section, is a surprisingly effective way to catch awkward phrasing that a silent read-through misses. Professional academic editing — distinct from generic AI grammar tools, which often miss field-specific terminology and can silently alter statistical meaning — closes this gap reliably for manuscripts headed to international, English-language SCI journals.

14. Preparing for Plagiarism Screening

Run your own similarity check before submission using an available plagiarism-detection tool, checking not just the overall percentage but the pattern — a single long, unbroken match to one source is a bigger concern than the same overall percentage spread thinly across many properly cited short phrases. Pay particular attention to your methods section if it draws heavily on a previously validated instrument’s original wording, since standard instrument descriptions can trigger false-positive similarity flags that are worth pre-empting with a brief note in your cover letter.

15. Version Control and Managing Co-Author Input

With multiple co-authors, use clear, dated file naming and a single shared document (via a versioned cloud file or track-changes in Word) rather than emailing separate edited copies back and forth, which reliably leads to lost changes and confusion about which version is current. Circulate a final “author sign-off” version before submission and get explicit confirmation from every co-author, not just a lack of objection, since submission portals typically require this confirmation formally from each listed author.

16. A Pre-Submission Checklist

  • Manuscript matches the target journal’s current author guidelines exactly
  • Title and abstract are specific, complete, and free of unsubstantiated claims
  • Keywords chosen for genuine discoverability, not just topic restatement
  • Methods section detailed enough for replication, including ethics approval reference
  • Results reported with exact statistics, free of interpretation
  • Discussion directly engages with the literature gap stated in the introduction
  • Limitations stated honestly and specifically
  • References formatted correctly with no in-text/list mismatches
  • Figures and tables meet resolution and format requirements and stand alone interpretively
  • Permissions secured for any reproduced figures or material
  • Cover letter tailored to the specific journal, not a reused generic template
  • Plagiarism similarity check run and reviewed before submission
  • All co-authors have reviewed and formally signed off on the final version

17. A Worked Example: Turning a Thesis Chapter Into a Submittable Manuscript

A typical Nigerian PhD thesis chapter runs considerably longer than a journal article, often includes extended literature review appropriate for a thesis examiner but excessive for a journal audience, and rarely follows a specific target journal’s structure. Converting one into a submittable manuscript usually means: cutting the literature review to the specific gap your study fills (often reducing a 15-page thesis review to 2–3 focused paragraphs), tightening the methods section to what’s needed for replication rather than full examiner scrutiny, and rewriting the discussion to engage with the wider published literature rather than only the thesis’s own internal chapter cross-references. It also typically means choosing one clear, publishable contribution from a chapter that may have covered several research questions at once — a thesis chapter answering four research questions often converts more successfully into two focused papers than one overloaded manuscript trying to cover all four.

18. Preparing the Same Manuscript for a Backup Journal

Because rejection after review is a normal part of the process rather than a sign of failed research, it’s worth preparing your manuscript with a realistic possibility of resubmission elsewhere in mind. This doesn’t mean writing a weaker or more generic paper — it means keeping your formatting modular enough to convert quickly: store your reference list in a manager that can re-export to a different citation style in minutes rather than hours, keep your figures at their original high resolution rather than only the compressed version embedded in a Word file, and keep a master, unformatted version of the manuscript text separate from any journal-specific template you’ve applied. When a rejection does arrive, this preparation is the difference between resubmitting to your backup-tier journal (see our guide on finding SCI-indexed journals for your research for how to build that backup shortlist) within days rather than weeks.

It’s also worth revisiting reviewer comments from the first journal honestly before resubmitting elsewhere, even where you disagree with the specific journal’s fit assessment — a methodological concern raised by one journal’s reviewer will very likely be raised again by a different journal’s reviewer if it wasn’t genuinely addressed, and quietly resubmitting an unrevised manuscript elsewhere rarely pays off.

19. Common Manuscript Preparation Mistakes That Recur Across Disciplines

  • Treating the cover letter as a formality and reusing the same generic wording for every journal
  • Submitting figures as low-resolution screenshots rather than the original high-resolution source files
  • Leaving abbreviations undefined at first use, then using them inconsistently through the rest of the manuscript
  • Writing the discussion as a restatement of the introduction rather than a genuine engagement with how the findings shift understanding
  • Under-describing statistical methods to the point that a reviewer cannot tell exactly which test, software, and assumptions were used
  • Failing to align the reference list style with the target journal until the final draft, creating a large, error-prone reformatting task right before submission instead of a manageable one done early
  • Assuming a co-author has reviewed a revision when they have only skimmed the summary email describing it

20. How Writers.ng Supports Manuscript Preparation

Writers.ng works with Nigerian researchers to take a manuscript from a completed study draft to a submission-ready package matching a specific target journal’s exact requirements — structural review, language editing, figure formatting, and cover letter drafting included. Explore our SCI journal publication services for end-to-end manuscript preparation support, or see our broader SCI manuscript submission assistance offering if you’re earlier in the process and still finalizing a target journal.

21. Frequently Asked Questions

Should I write the abstract first or last? Last — it’s easier to summarize accurately once the full manuscript, including final results and discussion, is complete.

How long should the methods section be relative to the rest of the paper? There’s no fixed ratio, but if a competent researcher in your field couldn’t replicate your study from the methods section alone, it needs more detail regardless of overall manuscript length.

Do I need a graphical abstract for every journal? No — check the specific journal’s requirements; it’s increasingly common in applied sciences and engineering but not universal.

Is it acceptable to submit a preprint before journal submission? Many journals now explicitly allow this, but always check the specific journal’s preprint policy and disclose the preprint in your cover letter to avoid any appearance of dual submission.

How much of a thesis chapter can I reuse verbatim in a manuscript? Treat your own thesis as you would any other prior work — substantial verbatim reuse without disclosure can still trigger a plagiarism-similarity flag (sometimes called “self-plagiarism”), so rewrite rather than copy-paste, and disclose the thesis as the source of the underlying study where relevant.

What’s the single most common reason a technically sound manuscript still gets returned before review? Formatting and completeness — a missing title-page element, wrong reference style, or absent ethics approval reference is far more likely to cause an early return than a flaw in the underlying research itself.